mamaprez
Snaptite
If, at first, you don't suceed,,,,put it back in the box and finish it ten years later.
Posts: 97
|
Post by mamaprez on Jan 25, 2009 8:20:02 GMT -5
In-progress resin kit from RMR. ( DO NOT confuse them with R&R). Very good quality castings. Donor kit is the Revell '41 Willys street rod kit for interior and suspension parts, etc. but a large amount of tweaking, parts box stealing and scratchbuilding is necessary if one wants to build a detailed model as opposed to a slammer.   Wheels are '06 Mustang with '51 Chevy caps glued to the centers,,,,,because they are DIFFERENT.  Will have '59 Corvette tailights and sunken license plate.  Big block with Dudek polished aluminum valve covers. |
|
|
|
Post by kirbside on Jan 25, 2009 13:42:19 GMT -5
Very cool! I like what you did with the wheels! Keep us posted.
|
|
|
|
Post by rodburner on Jan 25, 2009 15:39:08 GMT -5
the body looks cool, how much do they run? first time I have seen Bob's BB covers used, they look nice!
|
|
mamaprez
Snaptite
If, at first, you don't suceed,,,,put it back in the box and finish it ten years later.
Posts: 97
|
Post by mamaprez on Jan 25, 2009 17:00:22 GMT -5
the body looks cool, how much do they run? first time I have seen Bob's BB covers used, they look nice! I think this kit was $35. I got it in Toledo. |
|
|
|
Post by geezerman35 on Jan 25, 2009 19:10:40 GMT -5
Be nice if this was a stock body for those of us that prefer to our own mods. This looks like it must take Corvette tailights.
Your wheels are great.
Will you have to come up with a grille, or scratch one?
|
|
mamaprez
Snaptite
If, at first, you don't suceed,,,,put it back in the box and finish it ten years later.
Posts: 97
|
Post by mamaprez on Jan 26, 2009 6:48:22 GMT -5
Be nice if this was a stock body for those of us that prefer to our own mods. This looks like it must take Corvette tailights. Your wheels are great. Will you have to come up with a grille, or scratch one? It comes with a grille. It had NO provisions for tailights. I am using '59 Vette tailights and I've molded in the light buckets before painting. I also sunk in ther license plat holder. |
|
|
|
Post by tooltas on Jan 31, 2009 21:36:58 GMT -5
nice
|
|
It's an interweb thing.....