|
|
Post by jeanguy41 on Mar 18, 2015 8:14:48 GMT -5
hi there, I am new to this forum,i just painted a 63 impala with urethane paint,its shinny and all ,got a few specs of dust and I would like to put some clear how about should I proceed and another question I would like to put a antenna,what do you guys use for a base for the antenna ,pictures would be really appreciated.thanks in advance
|
|
|
|
Post by Mr.409 on Mar 18, 2015 17:19:33 GMT -5
If the dust specs are big or they can be seen very well, I'd wetsand the body with 1000 grit sandpaper and spray a light coat of paint on it. Important is to spray a light coat, a heavy coat will hide details and body shapes quite easily. Then for the clear coat I think there's no sanding or anything needed, just start slow with very light coats sprayed from a bit further away and then move on to heavier coats.
Hope this helps.
|
|
It's an interweb thing.....