Post by ScaleModelRestoration on Feb 28, 2010 21:03:21 GMT -5
Finally completing it,
Here's an update!
.........pics as follows..........
Tore the engine almost all apart and pulled off the 8 webber carb intake for a future build.....added a intake from amt 66 mustang 289.
drill out the Dist for plug wires as well as the heads, the start was also drilled out and wire installed,also the ground wire a hole was drilled int he end of the cylinder head and inserted.........battery was drilled out.........heck i went as far as to add a fuel line with filter.......
need to work on CVT boot alittle too, but shes almost done,needs a steering wheel and a radiator.....
Here's an update!
.........pics as follows..........
Tore the engine almost all apart and pulled off the 8 webber carb intake for a future build.....added a intake from amt 66 mustang 289.
drill out the Dist for plug wires as well as the heads, the start was also drilled out and wire installed,also the ground wire a hole was drilled int he end of the cylinder head and inserted.........battery was drilled out.........heck i went as far as to add a fuel line with filter.......
need to work on CVT boot alittle too, but shes almost done,needs a steering wheel and a radiator.....
It's an interweb thing.....