|
|
Post by rodburner on Feb 18, 2008 4:49:53 GMT -5
|
|
|
|
Post by geezerman35 on Feb 18, 2008 5:07:19 GMT -5
Box has a nice looking chop.
|
|
|
|
Post by rodburner on Feb 18, 2008 15:47:26 GMT -5
Box has a nice looking chop. yeah i think it does too! i don't normally go after resin bodies, but this one pulled me in! |
|
|
|
Post by rodburner on Feb 18, 2008 18:32:19 GMT -5
Oriental Kandy Blue by Black Gold over Silver Frost by Dupli Color  Hosted on Fotki |
|
|
|
Post by rodburner on Feb 19, 2008 1:17:37 GMT -5
|
|
|
|
Post by gerg on Feb 19, 2008 2:07:51 GMT -5
Looking good there Bob. Keep the pics a coming!
|
|
|
|
Post by rodburner on Feb 22, 2008 6:46:39 GMT -5
|
|
|
|
Post by rodburner on Feb 22, 2008 16:05:29 GMT -5
looks good Bob, I wish i could get a model that shiney thanks Ben! i am sure you could, it's just a bit of wet sanding and some kit wax. |
|
|
|
Post by rodburner on Apr 6, 2008 2:07:10 GMT -5
for my all nighter, i was already over to a friends house with a few guys building...so i got the foiling finished up on this.  Hosted on Fotki Hosted on Fotki |
|
|
|
Post by ronkok on Apr 6, 2008 17:54:30 GMT -5
Looks great Bob and a nice shine on it.
What kind of brand are you using for the clear cote?
Ron
|
|
|
|
Post by rodburner on Apr 6, 2008 18:49:47 GMT -5
|
|
|
|
Post by rodburner on Apr 6, 2008 18:53:24 GMT -5
Looks great Bob and a nice shine on it. What kind of brand are you using for the clear cote? Ron thanks Ron! i use Dupli Color lacquer clear coat. i dunno if it's so much the brand or not? I always wet sand my clears until they are complete dull, with no dimples and then i wax/polish it out to a deep shine with KIT Carnauba car wax. I pretty much do it the same as i did when i worked in a body shop years ago, accept im not buffing with a huge wheel lol |
|
|
|
Post by ronkok on Apr 8, 2008 17:44:01 GMT -5
accept im not buffing with a huge wheel lol Not   Thanks for the answer I`m always looking for the best clear coat on my models and still not happy at this moment  I must say I only used Acrylic paints and the for the clear I use a rattle can, I almost mus take care with wet sanding that I do not sand thou the clear coat  Ron |
|
|
|
Post by rodburner on Apr 8, 2008 23:07:40 GMT -5
accept im not buffing with a huge wheel lol Not Thanks for the answer I`m always looking for the best clear coat on my models and still not happy at this moment I must say I only used Acrylic paints and the for the clear I use a rattle can, I almost mus take care with wet sanding that I do not sand thou the clear coat Ron no prob Ron! i hope you find a good clear around you. the Dupli Color i use is Acrylic Lacquer, but i don't know if it will work over regular Acrylic or not. |
|
|
|
Post by ronkok on Apr 9, 2008 5:47:10 GMT -5
I`m a stupid Dutch modeller because the clear that I used this moment is .......... Dupli color and its go`s well over Acrylics.
Ron
|
|
It's an interweb thing.....