|
Post by chromecop on Nov 25, 2018 12:55:08 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 12:56:01 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 12:57:31 GMT -5
I did some work to the Promo before cutting it apart: adding Pegasus 19" disc breaks to the modern wheels I'm using. The front axle/suspension has been modified and lowered.
|
|
|
Post by chromecop on Nov 25, 2018 12:58:08 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 12:59:11 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 13:00:20 GMT -5
Modified the engine dummy and chassies plate to look better and accept the lowered rear suspension:
|
|
|
Post by chromecop on Nov 25, 2018 13:00:57 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 13:01:39 GMT -5
Roof glued to body and both A-pillars repaired:
|
|
|
Post by chromecop on Nov 25, 2018 13:03:09 GMT -5
|
|
|
Post by chromecop on Nov 25, 2018 13:05:25 GMT -5
Scratchbuilt new taillights : First taillight done and testmounted:
|
|
|
Post by chromecop on Nov 25, 2018 13:06:27 GMT -5
The new front valance only needed some wet-sanding before primer/paint
|
|
|
Post by chromecop on Nov 25, 2018 13:07:57 GMT -5
I added material to the flares in the "grille-openings" Nose-job almost done: I cut 4 small strips of half round evergreen and glued in place over the "grille-openings" :
|
|
|
Post by chromecop on Nov 25, 2018 13:08:56 GMT -5
I built the chassie in traditional early VW stance style here's the rear suspension: Front axle, 2,5 scale inches narrowed, and suspension ready to be mounted to the chassies plate: And here's what will become an exhaust system:
|
|
|
Post by chromecop on Nov 25, 2018 13:10:09 GMT -5
More work on the exhaust: test-mounted:
|
|
|
Post by chromecop on Nov 25, 2018 13:11:38 GMT -5
|
|